不銹鋼1.4313是馬氏體級，耐被結垢高，熱解決后耐久度性好。X3CrNiMo13-4鋼的機誡使用特點是因藥劑學完分中鉬和鎳的高含磷量。這和金移除劑限止了延長級碳含磷量的必須要——給定鹽濃度能比于奧氏體不銹鋼。然而鎳含磷量不太高，但鎳含磷量約為4%，偏態不斷提高了鋼對所有被結垢壞境的減少力——第二次機誡使用特點。X3CrNiMo13-4鋼粉絲可加工獨角獸高達300℃在濕度下運作的加工機件和加工機件，已經露出在所有被結垢壞境中的加工機件，直接保持良好足夠了的表面能因素括抗氯化物材質)。QT650.QT780和QT900因素下，熱解決后最應交由鋼管。半產品用到油田加工.礦業.在冶金工程和能源開發產業，泄壓閥機露出在高無刺激溫度過低下.泵.壓解機構件。鋼不適應合補焊。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50供應信息EN1.4313馬氏體不銹鋼材質極具滲碳性能指標（+A）環境、表面淬火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，須得哪另一個相應要跟行業說看清楚哦。